GPS RECEIVER USB MAGNETIC MOUNTING
BU-303 has all the hardware necessary for customer to connect the equipment to Notebook or Laptop PC. BU-303 enables easy and convenient connecting to your computer through a USB connector. If you already have application software or you are developing own application, and you need a GPS receiver to provide you position, velocity and time data, this is the one perfectly fits your needs. The USB driver and user manual are enclosed.

PRODUCT FEATURES

• Compact size : 59mm*47mm*21mm

• Built-in active Antenna, high sensitivity to satellite signal.

• Within SiRF StarII/LP low power. All-in-View high performance 12-parallel channels GPS chipsets power consumption : continuous mode 80mA(include Antenna).

• Support Standard NMEA 0183 GGA, GSA, GSV, RMC, GLL, VTG.

• Super-cohesive magneeic for mounting on the car.

• LED indicator for GPS fix or not fix.

• Water-resistant.
  
  SPECIFICATIONS

• Interface USB

• Output Messages NMEA0183 V2.2 protocol, and supports command: GGA, GSA, GSV, RMC, VTG, GLL

• Datum WGS84

• Hot Start 8 sec.average

• Warm Start 38 sec.average

• Cold Start 48 sec.average

• Acceleration Limit <4g

• Altitude Limit 18,000m(60,000 feet)Max.

• Re-acquisition 100ms

• Velocity Limit 515 meters/sec(1000knots)Max

• Jerk Limit 20 m/sec**3

• Horizontal Accuracy 15m 2d RMS without SA

• Vertical Accuracy 40m 95%

• Velocity Accuracy 0.1m / sec 95%

• Time Accuracy lus synchronized to GPS time

• Dimension 59mm*47mm*21mm

• Power Consumption 90 mA(include Antenna)

• Storage Temperature -40°~ 85°C

• Operation Temperature -40°~ 80°C

• Humidity Up to 95% non – Condensing